CarPlay Decoder Manual For Benz

CarPlay Decoder Manual For BENZ

  Product Parameters  

  • Video Input: 2 Channels Cvbs, 1 Channel Vga
  • Video Output: 1 Way Lvds
  • Host Size: 142*100*26MM
  • Working Voltage: 12v~16v
  • Ambient Temperature: -20 ° C ~ 80 ° C
  • Working Current: Dc12V~1A
  • Usb Output: 5V/1A

  Features  

  • Using The Original Car Microphone
  • Non-Destructive Docking, Free Of Broken Lines
  • Original Car Style Reversing And Radar Display
  • Usb Lossless Input Audio
  • 360 Reversing Interface (Reserved), Front View Video Input, Reversing Image

 

   Installation & Connection Method  

 Mercedes carplay decoder installation and user manual

NOTE:

  • Host Transfer To LVDS
  • After Installation, All The Harnesses Must Be Docked To Be Able To Start Normally
  • Please Test The Function After Installing , Please Check The Sound, Microphone.
  • Please connect A-GND with GND to verify if there is any noise.


Button Function And Reversing Function In Turn.
Install Reversing Image Wiring:
Dial Code: 1.OFF 2.ON 3.ON 7.OFF
Wiring: Reversing Signal Connected To Rear_CVBS / Power Supply Conne -cted To Cam_Power
Retrofit Front View - Wiring: Av Signal Connect To Front_CVBS

Use The Original Car Reversing Image - Dial Code: 7.ON

 

  Use Connection  

 

  Enter The System   

Long Press The"Return Button" Of The Original Car To Enter The System.

Use This Product Must Switch The Original Car Audio Source To AUX(External Audio Input).
And Disconnect The Bluetooth Connection From Your Phone.

Select The Appropriate CarPlay, Android auto And Other Functions In The System Interface.

  Press Button Instruction 

1.Return Button (Switch Button): Long Press To Switch To The System, Short Press To Return
2. Long Press To Wake Up Siri Or Google Voice Assistant
3. Answer/Hang Up The Phone
4. Knob, Press To Confirm
Push Up And Down Corresponding To The Up And Down Direction
Push Left And Right To The Last Song, The Next Song

Note:
The Above Functions May Differ In Some Models;
To Ensure Stable Connection, Please Use The Original MobilePhone Data Cable Connection;
When Using The CarPlay Function Of This Product, Please Disconnect The Phone FromThe Bluetooth Of The Car;
If The Original Car Supports The Sound Of Berlin, You Need To Move The Fiber Optic Cable To The Power Plug Of The Host;
Use The USB Input Sound, You Need To Switch The Original Car Audio To USB Before Use. The Original Car Supports AUX, No Need To Use Additional USB Audio Transfer Or Fm Transfer;
NTG4.5 Models Such As The Original Car Without AUX, Can Be Brushed Out By Brush.

 

Leave a comment

All comments are moderated before being published

Shop now